Inhibition of the P2X7 receptor prevents atrial proarrhythmic remodeling in experimental post-operative atrial fibrillation.

BACKGROUND: Post-operative atrial fibrillation (POAF) is a common complication in patients undergoing cardiac surgery. The purinergic receptor P2X7 (P2X7R) is involved in some cardiovascular diseases, whereas its effects on atrial fibrillation (AF) are unclear. OBJECTIVE: This study was to assess the effect of P2X7R on atrial arrhythmogenic remodeling in the rat model of sterile pericarditis (SP). METHODS: Male Sprague-Dawley (SD) rats were used to induce the SP model. Electrocardiogram, atrial electrophysiological protocol, histology, mRNA sequencing, real-time quantitative PCR, western blot, and Elisa assay were performed. RESULTS: SP significantly up-regulated P2X7R expression; increased AF susceptibility; reduced the protein expression of ion channels including Nav1.5, Cav1.2, Kv4.2, Kv4.3, and Kv1.5; caused atrial fibrosis; increased norepinephrine (NE) level in plasma; promoted the production of inflammatory cytokines such as TNF-α, IL-1ß, and IL-6; increased the accumulation of immune cells (CD68- and MPO- positive cells); and activated NLRP3 inflammasome signaling pathway. P2X7R antagonist Brilliant Blue G (BBG) mitigated SP-induced alterations. The mRNA sequencing demonstrated that BBG prevented POAF mainly by regulating the immune system. In addition, another selective P2X7R antagonist A740003, and IL-1R antagonist anakinra also reduced AF inducibility in the SP model. CONCLUSIONS: P2X7R inhibition prevents SP-induced atrial proarrhythmic remodeling, which is closely associated with the improvement of inflammatory changes, ion channel expression, atrial fibrosis, and sympathetic activation. The findings point to P2X7R inhibition as a promising target for AF (particularly POAF) and perhaps other conditions.

P2X7 receptor inhibition prevents atrial fibrillation in rodent models of depression.

AIMS: Depression, the most prevalent psychiatric disorder, is associated with the occurrence and development of atrial fibrillation (AF). P2X7 receptor (P2X7R) activation participates in the development of depression, but little attention has been given to its role in AF. This study was to investigate the effects of P2X7R on AF in depression models. METHODS AND RESULTS: Lipopolysaccharide (LPS) and chronic unpredictable stress (CUS) were carried out to induce depression in rodents. Behavioural assessments, atrial electrophysiological parameters, electrocardiogram (ECG) parameters, western blot, and histology were performed. Atrial fibrillation inducibility was increased in both LPS- and CUS-induced depression, along with the up-regulation of P2X7R in atria. CUS facilitated atrial fibrosis. CUS reduced heart rate variability (HRV) and increased the expression of TH and GAP43, representing autonomic dysfunction. Down-regulation of Nav1.5, Cav1.2, Kv1.5, Kv4.3, Cx40, and Cx43 in CUS indicated the abnormalities in ion channels. In addition, the expression levels of TLR4, P65, P-P65, NLRP3, ASC, caspase-1, and IL-1ß were elevated in depression models. Pharmacological inhibitor (Brilliant Blue G, BBG) or genetic deficiency of P2X7R significantly mitigated depressive-like behaviours; ameliorated electrophysiological deterioration and autonomic dysfunction; improved ion channel expression and atrial fibrosis; and prevented atrial NLRP3 inflammasome activation in the pathophysiological process of AF in depression models. CONCLUSION: LPS or CUS induces AF and promotes P2X7R-dependent activation of NLRP3 inflammasome, whereas pharmacological P2X7R inhibition or P2X7R genetic deficiency prevents atrial remodelling without interrupting normal atrial physiological functions. Our results point to P2X7R as an important factor in the pathology of AF in depression.

TRPV2 inhibitor tranilast prevents atrial fibrillation in rat models of pulmonary hypertension.

Atrial fibrillation (AF) is common in pulmonary hypertension (PH), whereas the mechanisms and treatments remain to be explored. TRPV2 regulates the structure and function of the cardiovascular system; however, little attention has been given to its role in AF. This study was to determine whether TRPV2 was involved in PH-induced AF and the effects of TRPV2 inhibitor tranilast on AF in rat models of PH. Monocrotaline (MCT) and SU5416/hypoxia (SuHx)-induced PH models were performed to detect atrial electrophysiological parameters. Daily tranilast (a TRPV2 inhibitor) or saline was given starting 1 day before PH establishment. PH increased the susceptibility to AF, with TRPV2 up-regulated in the right atria. Compared to PH rats, tranilast reduced AF inducibility and the prolongations of ERP and APD; mitigated cardiopulmonary remodeling and the increases in P-wave duration and P-R interval; partially reversed the down-regulation of ion channels such as Cav1.2, Nav1.5, Kv4.3, Kv4.2, Kv1.5, Kir2.1, Kir3.1, Kir3.4 as well as connexin (Cx) 40 and Cx43; improved right atrial (RA) fibrosis, enlargement, and myocardial hypertrophy; decreased the accumulation of inflammatory cells; down-regulated inflammatory indicators such as TNF-α, IL-1ß, CXCL1, and CXCL2; and inhibited the activation of the PI3K-AKT-NF-κB signaling pathway. Our results reveal that TRPV2 participates in PH-induced AF, and TRPV2 inhibitor tranilast prevents PH-induced RA remodeling. TRPV2 might be a promising target for PH-induced AF.

Enhanced Forward Osmosis Desalination with a Hybrid Ionic Liquid/Hydrogel Thermoresponsive Draw Agent System.

Forward osmosis (FO) has emerged as a new technology for desalination and exhibits potentials for applications where reverse osmosis is incapable or uneconomical for treating streams with high salinity or fouling propensity. However, most of current draw agents in FO are salts and difficult to be recycled cost- and energy-effectively. In this work, we demonstrate a new and facile approach to efficiently recover water from the FO process with enhanced water purity by using a binary ion liquid/hydrogel system. The hybrid ion liquid/hydrogel draw solution system demonstrated in this work synergistically leverages the thermoresponsive properties of both the ionic liquid (IL) and hydrogel to improve the overall FO performance. Our findings corroborate that the hydrogel mitigates the water flux decline of the IL as the draw agent and provide a ready route to contiguously and effectively regenerate water from the FO process. Such a route allows for an efficient recovery of water from the draw solute/water mixture with enhanced water purity, compared with conventional thermal treating of lower critical solution temperature IL draw solute/water. Furthermore, hydrogels can be used in a continuous and readily recyclable process to recover water without heating the entire draw solute/water mixture. Our design principles open the door to use low-grade/waste heat or solar energy to regenerate draw agents and potentially reduce energy in the FO process considerably.

Molecular Layer Deposition-Modified 5A Zeolite for Highly Efficient CO2 Capture.

Effective pore mouth size of 5A zeolite was engineered by depositing an ultrathin layer of microporous TiO2 on its external surface and appropriate pore misalignment at the interface. As a result, a slightly bigger N2 molecule (kinetic diameter: 0.364 nm) was effectively excluded, whereas CO2 (kinetic diameter: 0.33 nm) adsorption was only influenced slightly. The prepared composite zeolite sorbents showed an ideal CO2/N2 adsorption selectivity as high as ∼70, a 4-fold increase over uncoated zeolite sorbents, while maintaining a high CO2 adsorption capacity (1.62 mmol/g at 0.5 bar and 25 °C) and a fast CO2 adsorption rate.

Dual-Channel, Molecular-Sieving Core/Shell ZIF@MOF Architectures as Engineered Fillers in Hybrid Membranes for Highly Selective CO2 Separation.

A novel core/shell porous crystalline structure was prepared using a large pore metal organic framework (MOF, UiO-66-NH2, pore size, ∼ 0.6 nm) as core surrounded by a small pore zeolitic imidazolate framework (ZIF, ZIF-8, pore size, ∼ 0.4 nm) through a layer-by-layer deposition method and subsequently used as an engineered filler to construct hybrid polysulfone (PSF) membranes for CO2 capture. Compared to traditional fillers utilizing only one type of porous material with rigid channels (either large or small), our custom designed core/shell fillers possess clear advantages via pore engineering: the large internal channels of the UiO-66-NH2 MOFs create molecular highways to accelerate molecular transport through the membrane, while the thin shells with small pores (ZIF-8) or even smaller pores generated at the interface by the imperfect registry between the overlapping pores of ZIF and MOF enhance molecular sieving thus serving to distinguish slightly larger N2 molecules (kinetic diameter, 0.364 nm) from smaller CO2 molecules (kinetic diameter, 0.33 nm). The resultant core/shell ZIF@MOF and as-prepared hybrid PSF membranes were characterized by transmission electron microscopy, X-ray diffraction, wide-angle X-ray scattering, scanning electron microscopy, Fourier transform infrared, thermogravimetric analysis, differential scanning calorimetry, and contact angle tests. The dependence of the separation performance of the membranes on the MOF/ZIF ratio was also studied by varying the number of layers of ZIF coatings. The integrated PSF-ZIF@MOF hybrid membrane (40 wt % loading) with optimized ZIF coating cycles showed improved hydrophobicity and excellent CO2 separation performance by simultaneously increasing CO2 permeability (CO2 permeability of 45.2 barrer, 710% higher than PSF membrane) and CO2/N2 selectivity (CO2/N2 selectivity of 39, 50% higher than PSF membrane), which is superior to most reported hybrid PSF membranes. The strategy of using dual-channel molecular sieving core/shell porous crystals in hybrid membranes thus provides a promising means for CO2 capture from flue gas.

Self-Assembly: A Facile Way of Forming Ultrathin, High-Performance Graphene Oxide Membranes for Water Purification.

Single-layer graphene oxide (SLGO) is emerging as a new-generation membrane material for high-flux, high-selectivity water purification, owing to its favorable two-dimensional morphology that allows facile fabrication of ultrathin membranes with subnanometer interlayer channels. However, reliable and precise molecular sieving performance still necessarily depends on thick graphene oxide (GO) deposition that usually leads to low water flux. This trade-off between selectivity and flux significantly impedes the development of ultrathin GO membranes. In this work, we demonstrate that the selectivity/flux trade-off can be broken by self-assembly of SLGO via simple deposition rate control. We find GO membranes, prepared by slow deposition of SLGO flakes, exhibit considerably improved salt rejection, while counterintuitively having 2.5-4 times higher water flux than that of membranes prepared by fast deposition. This finding has extensive implications of designing/tuning interlayer nanostructure of ultrathin GO membranes by simply controlling SLGO deposition rate and thus may greatly facilitate their development for high flux, high selectivity water purification.

Nanovalved Adsorbents for CH4 Storage.

A novel concept of utilizing nanoporous coatings as effective nanovalves on microporous adsorbents was developed for high capacity natural gas storage at low storage pressure. The work reported here for the first time presents the concept of nanovalved adsorbents capable of sealing high pressure CH4 inside the adsorbents and storing it at low pressure. Traditional natural gas storage tanks are thick and heavy, which makes them expensive to manufacture and highly energy-consuming to carry around. Our design uses unique adsorbent pellets with nanoscale pores surrounded by a coating that functions as a valve to help manage the pressure of the gas and facilitate more efficient storage and transportation. We expect this new concept will result in a lighter, more affordable product with increased storage capacity. The nanovalved adsorbent concept demonstrated here can be potentially extended for the storage of other important gas molecules targeted for diverse relevant functional applications.

Continuously Adjustable, Molecular-Sieving "Gate" on 5A Zeolite for Distinguishing Small Organic Molecules by Size.

Zeolites/molecular sieves with uniform, molecular-sized pores are important for many adsorption-based separation processes. Pore size gaps, however, exist in the current zeolite family. This leads to a great challenge of separating molecules with size differences at ~0.01 nm level. Here, we report a novel concept, pore misalignment, to form a continuously adjustable, molecular-sieving "gate" at the 5A zeolite pore entrance without sacrificing the internal capacity. Misalignment of the micropores of the alumina coating with the 5A zeolite pores was related with and facilely adjusted by the coating thickness. For the first time, organic molecules with sub-0.01 nm size differences were effectively distinguished via appropriate misalignment. This novel concept may have great potential to fill the pore size gaps of the zeolite family and realize size-selective adsorption separation.

Growth of High-Quality, Thickness-Reduced Zeolite Membranes towards N2 /CH4 Separation Using High-Aspect-Ratio Seeds.

Greatly improved zeolite membranes were prepared by using high-aspect-ratio zeolite seeds. Slice-shaped seeds with a high aspect ratio (AR) facilitated growth of thinner continuous SAPO-34 membranes of much higher quality. These membranes showed N2 permeances as high as (2.87±0.15)×10(-7)  mol m(-2) s(-1) Pa(-1) at 22 °C while maintaining a decent N2 /CH4 selectivity (9-11.2 for equimolar mixture). On the basis of these thinner high-quality SAPO-34 membranes, fine-tuning the local crystal structure by incorporating more silicon further increased the N2 permeance by 1.4 times without sacrificing the N2 /CH4 selectivity. We expect that application of large AR zeolite seeds might be a viable strategy to grow thin high-quality zeolite membranes. In addition, fine-tuning of the crystal structure by changing the crystal composition might be a feasible way for further improving the separating performance of high-quality zeolite membranes.

Composite 5A zeolite with ultrathin porous TiO2 coating for selective gas adsorption.

A composite zeolite adsorbent was prepared by conformally depositing an ultrathin porous TiO2 coating on the external surface of the 5A zeolite by molecular layer deposition (MLD) and subsequent calcination. The composite adsorbent showed significantly improved ideal adsorption selectivity for CO2-CH4, CO2-N2 and propylene-propane.

Ultrathin, molecular-sieving graphene oxide membranes for selective hydrogen separation.

Ultrathin, molecular-sieving membranes have great potential to realize high-flux, high-selectivity mixture separation at low energy cost. Current microporous membranes [pore size < 1 nanometer (nm)], however, are usually relatively thick. With the use of current membrane materials and techniques, it is difficult to prepare microporous membranes thinner than 20 nm without introducing extra defects. Here, we report ultrathin graphene oxide (GO) membranes, with thickness approaching 1.8 nm, prepared by a facile filtration process. These membranes showed mixture separation selectivities as high as 3400 and 900 for H2/CO2 and H2/N2 mixtures, respectively, through selective structural defects on GO.